You can’t beat a Victorian Tiled Hallway it’s such a practical and obvious choice, unfortunately however this floor at a house in Chester had been neglected over the years and covered up with carpet that had been glued to the tile.
Restoring Victorian Floor Tiles
To remove the dirt, paint and carpet glue it was necessary to coat the floor in a strong dilution of Tile Doctor Remove and Go which as the name suggests is a powerful coatings remover that’s safe to use on tiles.
The solution was left to soak into the tiles in order to break down the glue and paint etc. before being scrubbed in using a rotary machine fitted with a black pad. This cleaned up most of the problems however there were a few stubborn areas on which we used a steamer to penetrate deep into the pores of the tile and lift out the stains. We then removed the soiled cleaning solution using a wet vacuum and give the floor a really thorough rinse.
Due to the age of the floor and house there was no damp proof installed under the floor and there was concern that even with a breathable sealer damp would become trapped under the tile, so we decided not to seal the tiles which is a shame as sealers do lift the appearance that much more. I think you will agree though the floor looks much improved.