This Travertine tiled floor installed in the kitchen of a house in Holmes Chapel was proving impossible to clean and this was compounded by the fact that black dirt had become trapped in the natural holes in the Travertine.
Cleaning Travertine Floor Tiles
The floor was given a wash with Tile Doctor Neutral Cleaner to remove any surface grit and this was followed by the application of the Tile Doctor burnishing system which involves the use of a set of four Burnishing pads fitted to a rotary machine. There are four pads and you start off with a course stripper pad with a little just water and then carry on with the finer pads until the floor is thoroughly cleaned and any previous sealer removed. The next step was to use Tile Doctor Pro-Clean along the grout lines with a stiff brush to get the grout cleaner and also around the holes in the travertine where dirt had become ingrained. Once the small holes were clean they were then filled with a matching coloured grout.
To bring up the polish on the Travertine tile the last of the four burnishing pads was applied with gives a final polish.
Sealing Travertine Floor Tiles
To seal the floor and protect it from staining two coats of Tile Doctor Colour Grow was applied; Colour Grow is a colour enhancing sealer which enhanced the natural colours in the stone. Once dry the last step was to buff the floor to a nice shine with a rotary machine fitted with a white pad.
Travertine Floor Cleaned, Polished and Sealed in Cheshire
I was asked to strip and re-seal these interesting Chinese Slate tiles that were installed in the kitchen floor of a property in Hale Barns, Cheshire. It seems the tiles had been re-sealed over the years without giving them a deep clean first resulting in dirt and grime being sealed in between layers of old sealer making them impossible for the customer to clean.
Cleaning Chinese Slate Floor Tiles
To remove the many layers of sealer and get the tiles clean I let them soak in a strong dilution of Tile Doctor Remove and Go which is a coatings remover for the stripping of sealers from floors that is safe to use on Tile, Stone and Grout. This was worked into the tile and grout using stiff brushes followed by steam cleaning the floor. The resulting soiled solution was removed and the floor washed down with clean water to reveal the bare stone; stubborn areas were re-treated using the same process before leaving the floor to dry before sealing.
Sealing Chinese Slate Floor Tiles
Once I was satisfied the floor was dry it was sealed using Tile Doctor Seal and Go which is a highly recommended sealer for slate that leaves an attractive low sheen finish and smooth surface, it’s also a water based sealer so there is no smell.
Over-Sealed Chinese Slate floor tiles stripped and re-sealed in Cheshire
These Sandstone floor tiles installed in the front room of a house in Bramhall were looking grey with no natural colour due to heavy soiling from family pets and muddy boots.
Cleaning Sandstone Floor Tiles
Cleaning the Sandstone was a straightforward process of applying a dilution of Tile Doctor Pro-Clean which is a commercial grade alkaline tile cleaning product designed for use on natural stone floors such as Sandstone, being an alkaline it doesn’t eat into the stone like acid cleaners. The solution was left to dwell for a while before working it into the stone with a rotary machine fitted with a black scrubbing pad. The resultant soiled solution was removed using wet vacuum and the floor washed down, there were still a few stubborn areas and the grout needed a good clean with more Pro-Clean and a stiff brush run along the grout lines.
Once I was happy with the condition of the floor any remaining cleaning solution was removed from the floor using a wet vacuum and the stone given a thorough rinse and left to dry.
The floor looked much improved however the customer on this occasion didn’t want the floor sealed which is a shame as a sealer really adds life to a floor and makes it easier to clean as a result this floor will soon discolour.
You can’t beat a Victorian Tiled Hallway it’s such a practical and obvious choice, unfortunately however this floor at a house in Chester had been neglected over the years and covered up with carpet that had been glued to the tile.
Restoring Victorian Floor Tiles
To remove the dirt, paint and carpet glue it was necessary to coat the floor in a strong dilution of Tile Doctor Remove and Go which as the name suggests is a powerful coatings remover that’s safe to use on tiles.
The solution was left to soak into the tiles in order to break down the glue and paint etc. before being scrubbed in using a rotary machine fitted with a black pad. This cleaned up most of the problems however there were a few stubborn areas on which we used a steamer to penetrate deep into the pores of the tile and lift out the stains. We then removed the soiled cleaning solution using a wet vacuum and give the floor a really thorough rinse.
Due to the age of the floor and house there was no damp proof installed under the floor and there was concern that even with a breathable sealer damp would become trapped under the tile, so we decided not to seal the tiles which is a shame as sealers do lift the appearance that much more. I think you will agree though the floor looks much improved.
Stained Victorian Tiled hallway floor cleaned and sealed in Cheshire
These beautiful Indian Sandstone tiles were installed on the ground floor of a house near Macclesfield and as you can see from the photographs had become heavily soiled which was masking the true natural colours in the stone resulting in a dark grey appearance.
Cleaning Indian Sandstone Floor Tiles
To get the tiles clean I let them soak in a strong dilution of Tile Doctor Pro-Clean for a while before working the cleaning agent in with a rotary machine fitted with a black scrubbing pad. The Pro-Clean also acts as a stripper so this process will remove any remaining sealer on the surface of the tile as well as the dirt.
Additionally all the grout lines were scrubbed by hand using more Pro-Clean and stiff scrubbing brushes. The remaining soiled solution was then removed from the floor using a wet vacuum and the tiles given a thorough rinse rinsed and left to dry completely with any stubborn marks re-treated using the same process.
Sealing Indian Sandstone Floor Tiles
Once I was satisfied the floor was dry it was sealed using Tile Doctor Seal and Go which is a topical sealer that leaves an attractive low sheen finish and smooth surface, it’s also a water based sealer so there is no smell.
Soiled Indian Sandstone floor tiles cleaned and sealed in Macclesfield
This Ceramic tiled bathroom with shower was installed at house Wilmslow and was overdue a refresh. You can see from the photographs below that the bathroom was looking tired and the tile and grout was discoloured with mould and acid build-up from washing products.
Cleaning Ceramic Tile and Grout
The Ceramic tiles and grout were treated using a strong 2:1 dilution of Tile Doctor Pro-Clean which is a strong alkaline Tile and Grout cleaning product. The solution was decanted into a bottle with a trigger spray attachment which when sprayed onto the wall allows the cleaner to mix with air making it lighter and allowing it to stick better. The solution was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry.
The grout looked better but I was unable to shift some of the staining so we decided to apply a white Grout Colourant, it’s a time consuming process but I think you will agree it made a big difference. Additionally the grout colourant product we use also forms a barrier over the surface making the grout much easier to clean going forward.
The last step was to remove the silicone sealant from along the top of bath and replace with new.
This classic Victorian tiled floor in Kingswood Kitchen; Cheshire was quite dirty and in need of a deep clean. Cleaning this type of floor is bread and butter for a Tile Doctor and so I had every confidence we could clean in and then re-seal it without any complications.
Cleaning a Stained Victorian Floor
In order to tack the ingrained dirt and I decided the best course of action would be to cover the Victorian Floor tiles with a 50/50 mix of Tile Doctor Pro-Clean and Nano-Tech UltraClean and leave it to work on the tile allowing the cleaner to break down any remaining previous sealer and in-grained dirt.
After about 30 minutes I steam cleaned the whole area multiple times to lift the ingrained dirt and grime out of the floor and then give the floor a thorough rinse removing the soiled solution using a wet vacuum. The floor was quite damp at this stage and needs to be dry to seal so we left it to dry overnight, we also left behind a dehumidifier to assist with the drying process.
Sealing a Victorian Floor
The next day we came back and tested the floor using a damp meter to make sure it was dry. Once we were satisfied we sealed the tiles using five coats of Tile Doctor Seal and Go which is ideal for Victorian tiles as it leaves an attractive low sheen finish, it’s also a water based sealer so there is no smell.
Soiled Victorian Tiled hallway floor cleaned and sealed in Cheshire
Details below of a Victorian tiled floor that we cleaned and sealed at a house in Hale, Cheshire, you can see from the photographs below how poor a condition it was in however the tiles were structurally sound so we set about restoring it.
Victorian Floor Deep Cleaning
The tiles were covered with thick layer of old resin, glue, trapped dirt, possibly wax as well, so the best system for this on Victorian Floor Tiles is to cover the Tiles with a 50/50 mix of Tile Doctor Remove and Go and NanoTech Ultra-Clean; the Remove and Go breaks down the wax, glues etc. while the Nano-Clean works deeper in to the tiles and encapsulates the trapped dirt. It does take time for this process to work however so to help the process along we soak the area with these products, cover over with a plastic sheet and then leave it. The plastic sheet this stops the products from drying out and also makes the floor sweat which works like a sauna to open up the pores of the Tiles. We then cover the plastic with Cotton Dust sheets and leave it like that overnight, the customer can still walk on the Floor area while the Treatment is in place.
The next day we lifted the plastic and steamed the whole area to help release the old trapped dirt and grime etc., the floor is then given a good rinse with clean water and we use a wet vacuum to remove the resultant slurry. We couldn’t seal the floor that day as it was still wet so the cotton sheets were put back on and switched on a dehumidifier to help speed up the drying process.
Victorian Floor Sealing
We came back the nextday and after testing the floor with a damp meter to ensure it was dry we began to seal it using five coats of Tile Doctor Seal and Go. Seal and Go is a sealer for Victorian floor tiles as it provides stain resistance as well as a low sheen finish.
The customer was very happy with the results and as you can see from the photographs we have managed to completely transform the floor.
Victorian Tiled floor cleaned and sealed in Cheshire